Curtainhook with exchangeable attachments

I needed a quick fix for our old bedroom were right now renovating.

So i designed a hook in Fusion 360, together with a pin system so it doesnt rotate with only one screw.
(You basically drill a 3mm diameter hole right next to the hole for the screw, and either print a pin or take a toothpick)
Also my gf wanted kind of a finish for that, so i made a flat portion at the front, where you now can just put on what you want.

For the first test, i took the flower from Hex17 ( https://www.thingiverse.com/thing:2398010 ) and cut the bottom portion to have it easier printed, and made a cut in the middle to paste the middle part in a different colour.

Happy printing! \o/