End cups for RAM Tab-Tite HD for iPad mini 6 with slim case.

End cups for RAM mount Tab-tite HD.   Modeled to fit an iPad Mini6 with a slim silicone flip cover case.   Holds fine with no case but the port holes do not line up very well.   Some thin rubber or TPU bumpers could be printed for better alignment.    

Universal - has all cut-outs and can be used on either end.  Good if you don't know which end you are going to need on which side.    Cut outs are chamfered for easier button access.   Power cut out is large enough to accommodate a 90-degree connector.

Top + Bottom have only necessary cut outs for a cleaner look.