Busy/Free Notification Sign

A two-piece busy/free sign, to indicate if you are free to talk to, or if you're busy with a task or meeting and the visitor should come back later.

Two holes are sized for 550-paracord, but are also large enough for alternative mounting options (e.g. - hooks, wire, suction cups, etc.).

PRINTING:

Supports are not required for the door, but the slots and rails will need support.  And, depending on your printer/retraction settings, they may need to be cleaned up – I've found a utility blade/razor run down both sides of each slot cleans up the print really well.

SIGN PRINTING:

I printed and laminated my paper sign for structure and stability.  The channels for the sign are wide enough for lamination, and fit perfectly as long as the maximum dimensions are 134x58mm.  The attached PDF should print at a 1:1 scale, as long as you don't re-scale it with your printer.

I have found that it's easiest to insert the sliding door halfway (past the first alignment bar), then insert/align the sign, then finish inserting the door.