2.5mm Allen key handle

Printable accessory developed specifically to improve the assembly experience for the Original Prusa Enclosure.
 

To assemble this print you need an 2.5mm Allen key (part of the package) and the following printed parts:

• Allen key handle
• Allen key holder A
• Allen key holder B

Print instructions

You have two options:

• use the pre-sliced G-code and print it on your MK3S+
• download the latest PrusaSlicer and use the following settings*:
  • print settings: 0.30mm DRAFT
  • filament: PETG (tested on Prusament)
  • 20% grid infill

* Note that print settings are recommended, but you can experiment with your own.