Quick-Printing AA Battery Holders (for 0.4mm nozzle)

I originally designed these battery holders to print quickly in spiral vase mode with an 0.6mm nozzle, but since many people use a 0.4mm nozzle, I modeled some with thinner walls to share.

Print with a 0.6mm external perimeter extrusion width, with at least 1mm of bottom layers, to avoid floating perimeters. The wall mount version has extensions sized to fix command strips or other double-stick tape.

Note that the 3mf file contains both models, but spiral vase mode only supports printing one at a time, so toggle the ‘Printable’ setting of the one you don't want to print.