Interlocking Drawers - 80mm Depth Remix

Updated 7-AUG-22: Corrected a "non-manifold" issue with double double drawer, and re-uploaded double width drawer to ensure it was correct version.

Updated 6-AUG-22: Corrected problem with double width sleeve (previous version was slightly too tall, which meant it didn't interlock properly) and also added double height versions.

My “standard” (single) drawer is based on the flat drawer by Subtle3D, and is the same height and width as the original, but at only 80mm deep. This was a more appropriate size for my intended uses. Other versions (double height and/or width) are multiples compared to this new standard (single) size.

I also made some adjustments to the sleeves so that they are solid on the back with countersunk screw holes for mounting to a wall. This means the cases don't print well in vase mode, but the drawers still should (and, in fact, must, unless you want a solid block. Otherwise, use 0% infill and 0 top layers.)

Should I eventually design any other sizes or accessories that attach to this interlocking system, I will upload them, so stay tuned as more items may be to come!

(Sorry for the low quality cover photo - I will update it as soon as I can. Printables requires a photo in order to upload, so I am temporarily using a screenshot from Blender.)