The One Ring Slip Case Dice Holder

This replaces the thin clear plastic dice holder that came with Cubicle 7's The One Ring slip case version of the rules.
17
19
0
643
updated January 7, 2025

Description

PDF

The clear plastic holder that came with the slipcase version of The One Ring RPG by Cubicle 7 has seen better days.  I created this to replace it.  The design used is from the gates of Moria.  It's sturdier than the clear plastic and something I think looks a bit better.

Printing Instructions:

  • Pictured is .2mm layer height, if you want a smoother look, you can use a more detailed height.  I like the stitched look the .2 gave it.
  • Add the DiceTrayBody.stl to the bed in PrusaSlicer, right click on the name go to Add Part, then Load.  Select the DiceTrayDesign.  It will go where it's supposed to automatically.
  • Adjust your XY Size Compensation under Printer Setting-Advanced-Slicing to 0.15 so the details are printed.
  • I used paint on supports for the tray, and support blockers for the design (still not sure why it was trying to add them.  I also used an inner and outer brim.  That kept it stuck to the bed very well while printing.

Tags



Model origin

The author marked this model as their own original creation.

License