Raspberry Pi 7 Inch Monitor Mount and Case

I 3D Printed a custom case and mount for my Raspberry Pi Screen that I use. 

Raspberry Pi 7 inch screen (Amazon Affiliate link): https://amzn.to/3PNmmCy

I used:

0.4mm nozzle for the case and cover. 20% infill.

The case will need supports on bottom for the notch to print flat and hook up to the mount.

0.25 mm nozzle for the monitor arm. As the little tabs in the front to hold it in place did not work well with the .4 mm nozzle.