Filament passage for Ikea Lack Enclusure

.gallery-skeleton { display: none; }

I had a lot of tension with a simple hole passing throught the Ikea Lack enclosure. So I added two small ball bearings

589

actualizado 1 de agosto de 2022

Descripción

This is a very simple passthrought using two 16mm ballbearings model V624ZZ.

For quick cutting the top and the bottom of the lack I used a wooden drill bit and manually refined the cut.

The assembling of the two axes has been done with some epoxy glue.

El autor ha hecho un remix de este modelo.