Cheekymandos - Blue Laser Tank (B.L.T.)

Uploading my "back catalog" to Prusa Printers! Hope you enjoy this design from 2018:

The Cheekymandos are back in Series 2: Rise of Blue Laser! Download the files to make your very own B.L.T.

Full parts list and DIY instructions at https://dragonmountaindesign.com/2018/06/13/cheekymandos-blue-laser-tank-b-l-t/

See it in action: https://youtu.be/9oklp5QrT38

Files for the missile launchers can be found at: https://www.prusaprinters.org/prints/24697-cheekymandos-missile-action-playset

Print instructions

BLT-Body
Material: PLA
Infill: 15% to 20%
Supports: Recommended.  I tried the part with and without.  The one that had supports turned out a bit nicer on the tread-track mating features.
Brim: Yes.  I found that it helped keep all the corners and edges nice and flat.

BLT-Cockpit
Material: PLA
Infill: 20%
Supports: Yes.  Decent amount of overhang is present.
Brim: Yes.

BLT-RightTreadTrack / BLT-LeftTreadTrack
Material: PLA
Infill: 20%
Supports: No.
Brim: Yes.

BLT-BearingPin (x6)
Material: PLA
Infill: 20%
Supports: No.
Brim: No.

BLT-FauxBearing (x6 OPTIONAL)
Material: PLA
Infill: 20%
Supports: No.
Brim: No.

BLT-MissileMount
Material: PLA
Infill: 20%
Supports: No.
Brim: Yes.

BLT-Canopy
Material: PLA
Infill: 20%
Supports: No.
Brim: Yes.

BLT-Tread (x2)
Material: NinjaFlex SemiFlex (Flex98A)
Infill: 20%
Supports: No.
Brim: No.