Handle and Tripod Camera Holder w/ Go Pro Attachment

The handle is perfect for holding a while filming and the bottom allows you to screw the handle onto a regular 1/4-20 thread (Nut inserted mid print into cap). The cap can also be unscrewed and the legs can be folded out and then the cap is screwed back on to allow the handle to turn into a tripod quickly. There is also an attachment that allows for two Go Pro Style mounts on it. Different mounts can be designed for it with a 6.8mm spacing between the two M3 mounting holes. 2 different handles are provided, one for brass inserts and the other for threading directly into the plastic.

I have also attached a blank mount step file for anyone to design their own mount to suit their needs.

For all parts except Cap Print at 0.2mm layer heights without supports. 

For the Cap use Variable Layer Height Feature for first 3mm to provide smooth round edge and then at 0.2mm for the rest of the print. Stop print at 6.6mm to install hex nut.

Parts Required to Print:

1x Handle (Either Brass Insert version or for Bolts version)

1x Cap

3x Leg

1x Go Pro Mount

Hardware:

2x M3x12mm Socket Head Cap Screws for mounting the Go Pro Mount to the Handle

3x M2x8mm Socket Head Cap Screws for attaching legs to handle.

1x ¼-20 Hex Nut for inserting into Cap Mid Print

Note: I am using this phone mount https://www.printables.com/model/884441-tripod-gopro-phone-mount in the images for a large screen to view the go pro but any Go Pro mount accessories should work with this handle