Prusa i3 MK2 Nest/DropCam Holder

Printed with gray Solutech PLA.

Frame clip snaps onto the top of the frame in between the spool holders.

Note that the camera will interfere with the printhead umbilical line at very high build heights (basically when the x stage hits the limits), but is fine for every print I've done.

I used some of the spare screws from the Prusa i3 Mk2 kit bag.

Print instructions

Category: 3D Printer Accessories Print Settings

Rafts: Doesn't Matter

Supports: Yes

Resolution: 150um

Infill: 20%

How I Designed This

Remixed from the Ultimaker Nest Cam holder, but with a custom-designed clip for the Prusa i3 Mk2. I used FreeCAD to convert the STLs to solids, then modified the clip in PTC Creo.