Fujifilm Instax Mini 8 - trigger replacement part

This is a replacement part for a Fujifilm Instax Mini 8 for the trigger mechanics.
12m
1× print file
0.20 mm
0.40 mm
1.00 g
1
14
0
288
updated July 26, 2022

Description

PDF

This is a replacement part for a Fujifilm Instax Mini 8. A small pin of the trigger arm in my camera broke, so I replaced it with this part. The symptom of this failure is that the shutter wont open any more and all your images come out black. 

Works right out of the printer. Only support needs to be removed. However, it's a little bit tricky to replace the actual part, so you need a good pair of tweezers.

There are videos on YouTube for the teardown of the camera. You basically only need to open the camera, remove the battery assembly and unscrew the broken arm. To remount the new part, you must load the spring onto the trigger arm. It's tricky, but after a few tries you should succeed. Beware of the remaining charge of the flash capacitor! You should remove the batteries of the camera and let it sit for a while (or you know how to properly handle the remaining charge).

Hope someone can fix his/her camera ;-)

Tags



Model origin

The author hasn't provided the model origin yet.

License


Highlighted models from creator

View more