Sapphire Plus/Pro Mosquito Mount

UPDATE:

Updated the FanMount.stl to include fins in the air path. This vastly improves heatbreak cooling and even drops the noise level due to reduced turbulence in the air path.

Designed a Mount for the Slice engineering Mosquito/Mellow NF-Crazy hotend.

It includes a 4020 fan for the hotend cooling and a 5015 fan for the parts cooling fan. The whole thing is a drop-in replacement for the stock hotend.

It also supports a BLTouch.

BLTouch offsets: X-28 Y0

• Print in PETG or ABS. Flame retardant material recommended.
• Make sure you buy a 5015 radial fan with at least 0.1A for sufficient part cooling.
• I used a Sunon 4020 24V 0.84W fan for hotend cooling but it makes the printer much louder. I will connect it to a stepdown converter to lower the RPM.

The cooling shroud is based on Stefan's CNC kitchen V6 mount (https://www.thingiverse.com/thing:3972199).

Hardware required:

• 1x 4020 24V fan
• 1x 5015 24V fan
• 1x Stock thermistor and heating cartridge
• 1x Grove mount adapter for the Mosquito

Screws:

• 3x stock M4 mounting screws or 3x M4x6mm
• 4x M4x30mm
• 2x M4x20mm
• 2x M3x8mm
• 2x M2.5x8-10mm
• Mounting hardware for the BLTouch that comes with it.

Things in the works:

• 4020 fan guard
• 4010 fan support and guard

Print Settings

Printer:

Sapphire PLUS

Rafts:

Doesn't Matter

Supports:

Doesn't Matter

Resolution:

0.2

Infill:

75%+

Filament: