I suppose this could also be purposed for the F22 M235i?
Brake Cooling Scoop for BMW M2 - ver. 2
New updated version with larger air intake. Now supports both 18" and 19" wheels and also both the original smaller…
49
446
0
3453
updated
July 26, 2022
Makes
Comments
@grocerylist_2753269 Sorry, don't know
thanks for sharing :)
how do you mount the hose to the heat shield?
on the picture they look stock just with the hose (somehow) mounted to it
@L10n_774086 I bought these shields with a short wide tube welded on. If you have the tools (welder) it is pretty straightforward to make your own. 3D print is of course a no go there due to the very high temperatures. (edited)
@MagnusT thank you. then I will buy the heat shields, too :)
Any recommendations on printing details (perimeters, filament, layer height?)
Thanks!
Brian
@Profylr_52929 I think I had 3 or 4 perimeters and quite high infill, 50% maybe. But if it gets hit by a stone at high speed it might crack regardless printing settings. Then again its still just a matter of printing one more 😀