Attach an 18mm inductive z-probe to the back of your extruder carriage.
Requires 2xM3-35mm screws.
You should adjust your X-bed size down to 180-190mm to accomodate the sensor.
I use the following offsets:
Printer Brand:
Anycubic
Printer:
Kossel
Rafts:
No
Supports:
No
Resolution:
200
Infill:
38
Filament: PolyMaker PLA
Category: 3D Printer PartsThe author marked this model as their own original creation. Imported from Thingiverse.