Davey Silensor Pool Pump Split Barrel Nut

Breaking a fitting on your pool can be a frustrating experience.  A typical repair involves cutting the pipe and gluing in a new union and fitting.  With a split barrel nut, you can replace the fitting without cutting any pipes.

Print the two parts and then mate them together over the pipe and secure both sides with a ¼" bolt and nut.

Instructions

• Print in PETG or ABS.  Do not use PLA as it will degrade and fail and could result in serious water damage!
• 0.4mm Nozzle
• 0.20mm layer height
• 100% Infill
• Supports on build plate
• Print with threads facing up