Battery Magazine

It is a battery box like an ammunition magazine.

Print Settings:

• Material: Spring parts must be printed with PETG. (PLA cannot withstand bending pressure it will break)
• Layer height: 0.2mm
• Supports: AAA_FloorPlate.stl
• Perimeters: 2

Assembly: 

Assemble the spring, "AAA_Follower.stl", and “AAA_FloorPlate.stl” as shown in the image. Place the assembled spring in the case. Be careful not to break the “AAA_FloorPlate.stl” lock pin. Trim if necessary.

Note:

• Two types of cases are available, with and without a slit window, which allows you to see the number of batteries remaining. Without slit window, we recommend the use of translucent filament.
• In rare cases, the battery will get stuck in the case, please tap the case.