CA - Accelerant Glue Holder

CA Glue (x2) and Accelerant Bottle combo holder. I regularly use the 1oz CA from my local hobby shop, and the 2 oz accelerator bottle. I have included the last 2 versions of the design I made, and pictures of the finished prints. Print requires no supports or rafts, should print cleanly.

Print Settings

Printer Brand:

Prusa

Printer:

i3 MK2S

Rafts:

No

Supports:

No

Resolution:

0.2 mm

Infill:

20%

How I Designed This

Design Choices - evolution

You can see the design iterations I went through in the below photo, where I first started with a lofted oval ring set in fustion 360, then made the top solid for 3 mm, and added in the glue and accelerant bottle holes. Note, I did also remove most of the material around the central bottle and outside bottles, but chose to leave the end items to give it a bit of mass and stability.rnrn Next revision, man new feature was to indent the sides to make it easier to grasp, as the splay was all around. rnrnLast revision I added finger grips and rounded all the edges.