Protective back case for 6502 40th Anniversary Computer Badge

Protective back case for 6502 40th Anniversary Computer Badge

For Lee Hart's 6502 40th Anniversary Computer Badge

Revision History

rev 2 - scruss 2017-12-03

• removed dependencies on external DXF outlines
• cleaned up parameters
• extended base so the case can act as a stand (great suggestion from

Josh Bensadon)

• extensively commented

Copyright

Protective back case for 6502 40th Anniversary Computer Badge

© 2017, Stewart C. Russell - scruss.com

Licence

Licensed to you under Creative Commons Attribution-NonCommercial-ShareAlike 2.5 Canada (CC BY-NC-SA 2.5 CA) licence: https://creativecommons.org/licenses/by-nc-sa/2.5/ca/

Pictures

http://scruss.com/blog/2017/12/02/3d-printed-back-cover-for-6502-badge/

Print Settings

Printer:

Reach 3D

Rafts:

No

Supports:

No

Resolution:

0.2

Infill:

100%

Notes:

 - Layer height: 0.2 mm
* Shell: 0.8 mm (2 shells, 0.4 mm nozzle)
* Base/Top: 0.6 mm (4 solid layers)
* Fill: 100%
* Printer: Reach 3D
* Print Speed: 60 mm / s
15 mm / s (bottom layer)

Retraction: 4 mm @ 40 mm / s
Adhesion type: Brim
Material: PLA+ (non-rigid PLA)
Temperatures: 215 °C / 50 °C (nozzle / bed)
Supports: None

Post-Printing
Cut out thin support layer from lanyard hole with a sharp knife