Customizable Bag Tag

Simple tag with raised initials. Best to use all-caps. It'll still work if you don't but might come out an odd shape.

Note that the example picture uses a different font that wasn't available in Customizer. I've used Roboto Black in this code.

Print Settings

Printer Brand:

Printrbot

Printer:

Rafts:

No

Supports:

Resolution:

0.2 mm

Infill:

Notes:

If you have a multi-filament printer, the backing is 2 mm high and the raised text and outline are 3 mm high.rnrnUse a brim if your printer doesn't have a heated bed.

Post-Printing

If you don't have a multi-filament printer:rnrn1. Print as normalrnrn2. Lightly sand the top surface with fine emery paper/abrasive to key itrnrn3. Add a contrasting colour with a permanent marker. Use a couple of coats, and let it dry in betweenrnrn4. For more permanence, coat the tag with acrylic medium.rnrnA length of micro-cord roughly 5u00d7 the length of the tag makes a simple and strong attachment. Double the cord, knot the free ends together, then pass the loop through the tag's hole and loop the tag back through again.