Glow Moose

Moose Head by MorenaP for Materio3D scaled to 100 mm wide and modified to take a NeoPixel Diffused 8mm Through-Hole LED. Use the clearest filament you can find and you've got a rainbow glow moose!

Licensing requirement from creator: if you create a derivative of this, please keep the logo visible somewhere.

(I had to move the Materio3D logo from under the LED void.)

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

No

Resolution:

0.2 mm

Infill:

100%

Filament: Generic PLA Clear

Notes:

Use the clearest filament you can find. I found that printing solid with radial infill helped with the material I used.

Post-Printing

Tip

Clear PLA tends to form very fine threads unless you print very slowly and manage retraction extremely carefully. Running a heat gun very quickly (a couple of seconds) over the model makes most of these go away. PLA melts quickly, so keep the heat gun moving.