Grab handle mounts (Ford S-Max)

These might fit a bunch of cars, no idea how widespread this design is but I wager a lot of older Fords are game at least - let me know in the comments if you find out!

Print on the side, with supports. Not elegant, but this gives the pivot the strength it needs. Heat resistant filament is a good idea as these attach almost directly to the roof, but I made mine from bog standard PLA and they're fine after over a year of use.

There are two versions, one with the cutout for the spring and one without. I deleted the rotary damper, it's not necessary as the friction was just enough damping alone.