BlitzFire X2 Stubba Kit

I'm a humongous fan of the game Warframe, so I had to try and recreate one of my favorite weapons as a cosmetic mod for a dart blaster.

This kit is the Stubba, and is meant to fit directly onto the Dart Zone Blitzfire X2.

Printing Details:
All of the larger pieces work at around 0.2mm layer height, but I prefer 0.1mm for the extra detail. The pins and scales should be printed at 0.07mm-0.1mm to ensure they fit correctly.
Supports will be needed. I used an infill of 25-35% for most parts.

Assembly:
Remove the original slide, muzzle piece, and grip scales. Retrieve all the screws from them as they are all needed. Also make sure you take out the slide return spring and the metal crossbar from the slide.

Clamshell open the blaster, fit the muzzle into the old muzzle's slot, and place the new scales where the old ones were. Superglue the scales in place.

Next, close the blaster up and simply attach all of the external pieces, ensuring that all 5 of the pins are in place.
For the slide, I suggest angling the return spring downward just a bit. This provides a little extra tension needed to ensure the now larger slide returns properly.

Use the screws from the muzzle and extra screw from the slide to attach the muzzle covers.

Done!