Battery Jar (Fast Vase Mode)

This compact container holds 7 batteries and has a twist-on lid.  There are three size options for AA, AAA or 18650 batteries.

Both the jar and lid print using spiral vase mode which minimizes the wall thickness, filament usage and print time.  The open loop jar design results in a double perimeter wall with the spiral ends fused to adjoining walls for extra strength and rigidity.  The lid uses a traditional spiral mode with a single wall.

Print Settings:

• Material: PLA
• Nozzle: 0.4mm
• Layer Height: 0.2mm
• Line Width: 0.5mm  <== Important
• Perimeters: 1
• Bottom Layers: 3
• Infill: None
• Supports: None
• Bed Adhesion: Skirt
• Spiral Vase: Enabled (Prusa Slicer setting)
• Spiralize Outer Contour: Enabled (Cura setting)
• Printing Orientation:  Jar bottom-side down, Lid top-side-down