Bike Steer Rod Saw Cutting Jig Guide Tool

Based on the design by a bike tool brand that machines tools in green.

This allows you to cut the tube while the fork is on the bike, no need for a table vice. I used a high TPI saw for my carbon fork.

In addition to the prints, you will need 2x M4 brass inserts and 2x M4 bolts for the top press (yellow) and 2x M3 brass inserts with 2x M3 bolts to attach the front guide (black piece).

Use 2 washers as spacers to match the width of your saw.

Use tape around the steerer to avoid pull-out and fraying edges.

Double check the tool is aligned correctly before cutting!