Dyson V8 compatible wall mount

Update: Tolerances increased for the locating pins made of 1.75 filament. Now 2.05mm up from 1.95mm
3h 59m
2× print file
0.20 mm
0.40 mm
40.00 g
10
117
1
1122
updated March 5, 2020

Description

PDF

Update: Tolerances increased for the locating pins made of 1.75 filament. Now 2.05mm up from 1.95mm. I also uploaded the print and step files.

Update: New version 12 has increased tolerances so the attachments snap in easier and the distance to the wall was slightly increased to allow for larger attachments.

Thank you for the feedback!

My Dyson v8 did not come with enough mounts for the given attachments, so I made this for my wall.

It's intended to be printed twice and glued together with filament used to line the parts up.

This should also fit the attachments that have a power connector or sit away from the wall a bit like the small floor attachment.

Please post a make if you try it out, and please let me know if things need adjustment.

Step file along with the 3mf file are included.

Print instructions

Category: Organization Print Settings

Printer Brand: Prusa

Printer: Mk3s

Rafts: No

Supports: Doesn't Matter

Resolution: 0.2

Infill: 10-20% 3 walls

Filament: Overture PETG Space Grey
Notes:

The button holes should come out fine without supports, but if you have cooling issues you might want to add minimal supports to those areas.

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License