Kitchen Scale Holder (Amazon Basics)

I split the model into two halves so it can be easily printed.  There are two countersunk screw holes in each half, but you can get away with using only one screw in each half.

I also included a full one-piece STL model in case anyone wants to play around with it.  But don't download it expecting to just print it (unless you add a bunch of supports or something).

It could also be simplified by removing the “wings” and adding caps to each side.  You could probably get away with printing it as one part if you did that.

As mentioned in the title, this was designed for an Amazon Basics kitchen scale (Model # EK3211).  It's unlikely to work with any other scale.  But the same idea could be used for other scales.