I'm starting to add some "smart" devices to the families house. This one can house a Wemos D1 mini and a DHT22 sensor. The design is straight forward, no fancy mounts or places for screws, because I'm using parts that I already have. So relays, clamps and converter might change from build to build. Just hot glue in the components and snap the case together.
If you're interested in this one, you might want to check these, too:
https://www.prusaprinters.org/prints/17287-wemos-d1-mini-plug-04
https://www.prusaprinters.org/prints/16723-wemos-d1-mini-plug-03
https://www.prusaprinters.org/prints/16607-wemos-d1-mini-plug-02
https://www.prusaprinters.org/prints/16445-wemos-d1-mini-plug-01
Printer Brand: Prusa
Printer: i3 MK3
Rafts: No
Supports: No
Resolution: 0.25mm
Infill: doesn't matter
Wire up the components, hot glue the components to the bottom plate (roughly labeled) and click the bottom and the cover together.
The author marked this model as their own original creation. Imported from Thingiverse.