Presentation box Divider tray for tea sugar coffee creamer cups

Connect the lid and the box together with a piece of filament used as a hinge pin.
If desired, the lid and the box can be closed with 2 magnets of 6 x 3 mm.
The layout of the box is 2 compartments for different flavors of tea bags.
The middle compartment for milk or creamer cups.
The left compartment for the sugar and sweetener container.
I myself use sugar sticks because they are packed separately.
If you want to use sugar cubes or loose sugar, use the separate 'sugar cube box' with lid. The sugar cube box fits in the box that I myself use for the sugar sticks.
It is wise to print the sugar cube box from food-safe filament.
The handle of the lid for the sugar cube box is screwed onto the lid, for this purpose the screw thread has been made in the lid and on the handle.

Nozzle 0.4
Layer height 0.2
Infill 15%
Support only needed at the box at the bottom of the hinge parts.
Printer Pusa Mini+

In order to be able to print the box with support for the hinge parts on the Prusa Mini, Prusaslicer gives a message that a part is outside the print area. You can ignore this message, the printing will still go well.

Support me with a cup of coffee