TOPLINE 1/10 Mazda FC3S RX-7 Body Accessories (GT Wing, Spoiler, Pop Up Lights, Front Bumper Support)

This is a compilation of body accessories I designed for the TOPLIINE FC3S body I'm using on my 1/10 RC drift car. 

• Pop-up assembly: All of these parts can be attached with clear Gorilla double-sided mounting tape. It is strong enough to hold but will peel off easily if need be. Photo #9 shows the mechanism I use to actuate the lights with a micro servo. The Lenses can be printed from clear PLA and glued in. The light housings have a hole for a single 5mm led.
• Wing: The wing is split into several parts, all of which have a flat surface to align to the build plate. These parts can be assembled with super glue and taped with mounting tape or screwed into the body
• Everything else is mountable with double-sided tape and should be pretty self-explanatory!

All parts can be printed at 0.2mm layer height/0.4mm line width and support is recommended. 

EDITS: 

• Added file Spoiler_no_mounting_tabs.stl
  • This file has no tabs to mount via double-sided tape. Instead, this spoiler would attach directly to the body with glue for a cleaner look
• Added files for left and right Ganador-style mirrors
• Added files for rear tail light buckets and lenses
  • these are more cyberpunk style, I may do a more period-correct style later.
• Added new front vent support model
  • this part has geometry closer to what the vent supports would look like irl. With this style, you would fully cut out the front bumper vent and put this part in painted the same color as the body (shown in one of the pics).