Hobie iTrek 11 (Mirage I11s) fish finder mount

This design is a fish finder mount on a Hobbie iTrek 11 or Mirage i11s ( old name)

it's design to for a Garmin STRIKER 5cv but can work with any Garmin fish finder GT20-TM

For other fish finder, you just need to design a different Tranducer mount

One print of each part except the

Strap_mount_bottom_half.stl where you need to print two

Parts Needed

24 - M1.6 X 10 Stainless Steel Screw (https://s.click.aliexpress.com/e/_9QuZBH )

24 - M1.6 L5 threaded inserts (https://s.click.aliexpress.com/e/_9f9NGX)

For the Transcducer Mount

1 - Aluminum tube 8 mm diameter (https://s.click.aliexpress.com/e/_AmTi1N)

4 - M3x16 Stainless Steel Screw (https://s.click.aliexpress.com/e/_9QuZBH )

4 - M3 Stainless Steel nuts (https://s.click.aliexpress.com/e/_A1Dh1p)

For the handle

1 - M5x60 Bolt screw (https://s.click.aliexpress.com/e/_AnTacb)

1 - M5 L8 threaded inserts (https://s.click.aliexpress.com/e/_9f9NGX)

5 - M2 L2 threaded inserts (https://s.click.aliexpress.com/e/_9f9NGX)

5 - M2 X 4 Stainless Steel Screw (https://s.click.aliexpress.com/e/_9QuZBH )

The Box

IKEA 365+ lid (https://www.ikea.com/ch/en/p/ikea-365-lid-rectangular-plastic-50361792/)

IKEA 365+ Box (https://www.ikea.com/ch/en/p/ikea-365-food-container-with-lid-rectangular-plastic-s19269079/)

12 - M3* 16 M3x16 Stainless Steel Screw (https://s.click.aliexpress.com/e/_9QuZBH )

12 - M3 Stainless Steel Nylock Nuts (https://s.click.aliexpress.com/e/_A1FVsf)

Print Settings

Printer Brand:

MK3

Printer:

Rafts:

No

Supports:

Resolution:

mix

Infill:

Filament: Any PETG