Ender 3 screen holder for Voron 0/0.1

This is a screen holder to mount a spare Creality style lcd to my Voron 0.1.  It's a nice simple upgrade that makes the printer a lot easier to use and it's nice and cheap.  There's also space on the left of the mount for a drawer that can be found here: https://www.printables.com/model/243333-storage-drawers-for-voron0-01

Print settings are easy, 0.2mm layer height and you'll need supports for the front portion of the holder.

I've designed this holder to have quite tight tolerances so it virtually snaps together, therefor you might need to do some light sanding to get everything to align perfectly.  You'll need 6 M3x16mm bolts and 4 M3 heat inserts.  The inserts go in the 4 holes in the back of the front portion and allow the screen and rear portion to be screwed into it.  The other 2 M3 bolts are used to mount the screen to the existing nuts in the bottom of the front extrusion of the printer.

I've also designed a Voron themed lcd knob that can be found here: https://www.printables.com/model/243330-voron-lcd-screen-knob

This will fit on Voron 0 bed but you may have to adjust or remove your skirt in the slicer.

If you found this model useful please click the 'like' button and upload a photo of your print. Also, comments and suggestions are always welcome.

As usual for my models I've included the .step and .f3d files for anyone who wants to make modifications.