Brush Drain Tray

This is a 3 part object able to be printed on most machines (originally printed on an EVNOVO sidewinder X1).

I wanted a way to hang my washed paint brushes in the stationary tub so the brushes can dry out. I also wanted to accommodate multiple sizes of brushes and have some adjust-ability. There are multiple "height" options for the tray to slide into and the "crook" can fit into multiple slots to account for different widths.

All components are friction fits.

Print instructions

Can be printed in PLA, PETG or any other material you feel comfortable printing in.

No more than 15% infill needed.

3-4 top and bottom layers

2 perimeters minimum

I would suggest using supports on the "Basin Hook"

Updates and Notes:

Thank you to everyone who has viewed, downloaded, and interacted with this model. It was one of my earlier designs that was...an idea. 

I'm getting back into making designs of things I enjoy and find useful, and I'm setting up a Ko-Fi account as a way for people to send a financial tip or thank you, only if you feel led.

If you do leave a tip, please share which model you came over from and what you enjoyed about it!

Ko-Fi: https://ko-fi.com/maroonmatador