Bigtreetech TFT v3.0 case and mounts

Case for the bigtreetech TFT version 3.0 with mounts for the Prusa Mk3, Bear frame, and 3030 extrusion.

Print instructions

Four 3mmx25mm screws with square nuts required for the case. four 3mmx6-8mm screws and nuts required to connect the mount to the case. Varied hardware needed to attach the mount to the printer.

No supports required for any parts, standard Prusa profiles work well. The mounts have built in supports that will snap off.

STL files were created in openSCAD and source files are available on request. Based on design: Bigtreetech TFT35 3.0 Case by BigFunkyMan
https://www.thingiverse.com/thing:3954074
with several corrections.