Sherpa Mini Carriage Mount for Prusa Anet A8 E3D v6 BLTouch Nozzlecam

Version 3.3

small fix: component_cooler_mount is more stable now.

!!!! New version 3.2 !!!!

Some improvements have been made, the cable ties are gone because they were too unstable and there is a holder for the Nozle Cam.

Assembly Video: https://youtu.be/6OJSKmMlmZA

Nozzle Cam at Action: https://youtu.be/DwDvykDdGIE

Nozzel Cam Tutorial: https://youtu.be/Jg_AKzuWCMw

The carriage can either be printed mut support at once or split into two and glued together later.

The duct is optimized by CFD simulation, many thanks to www.simscale.com

If you have virtual endstops with the TMC driver print the spacer X Rod also, I have added a picture of how to take these as a stop

I recommend printing with PETG or ABS in any case!

What is needed?

• Sherpa Mini Extruder
• BLTouch
• 40x40 Fan (Heatsink Fan)
• 5015 Fan (Part Cooling)
• A small piece bowden tube (40mm)
• 2x Lm8uu (ball bearing)
• M3 Screw with Nuts

Klipper Settings

[bltouch]

z_offset: 0.7 # Fine tuning still needs to be done

x_offset: -24

y_offset: 9.8

[extruder]

rotation_distance: 22.67895 #for 5mm Shaft Driven Bondtech gearsets

gear_ratio: 50:10 # 50:10 for standard 10t motor, 50:8 for sherpa mini 8t motor

microsteps: 16

full_steps_per_rotation: 200 #1.8deg Motor

***optional if u dont use endstops

[safe_z_home]

home_xy_position: 134,100

How I Designed This