Spray Bottle Hanger (Improved for Strength)

Updated the original design to incorporate improvements based on real world use. Still no supports needed and basic print settings work just fine. There are numerous versions including "decorative" designs. I look forward to seeing other remixes posted to Printables.

1: Switched print orientation for strength (hypotenuse prints on bed so the load on the filament strands are in direct tension, or compression. [depends on mount orientation]) This modification ensures no issues with 'de-lamination' of print layers under heavy load do to potential poor layer adhesion.

2: Prints in under 2 hours for the basic design (use 3 walls so there is no infill in the beam support) [Fancy print options with designs will take closer to 3 hours]

3: Updated license for remix to allow sales of printed parts (not the files please, they are intended to be free for all to use)

4: Symmetrical "seat" allows to mount in two orientations based on user preference.

5: Same overall dimensions of the original (only change is no more radius on the hypotenuse beam support).

Please feel free to remix with additional tweaks to add variety of options for future users of the design/prints. Fusion360 file or step file available upon request.

Note: 1 gallon of water weighs 8 lb, and this design can hold at a minimum 25 lb proven by test with just one mount screw.