Dogecoin Accept here Sign

Thanks Dogecoin Worker Bee! 🛠️🐝(@ArroyoXIII) for the design. Please kindly follow his twitter.

This model is designed to print in face down such that it will have a better appearance. It is recommend to print it with 0.2mm layer height since the model is designed based on 0.2mm layer height.

=== Printing Instruction===

g-code preparation

• Place the inlay.stl (face down) to slicer, set the coordinate to 0, 0, 0 and set the initial layer height of 0.2mm. Export the g-code.
• Place the sign.stl (face down) to slicer, set the coordinate to 0, 0, 0 and set the initial layer height of 0.2mm. Export the g-code.
• * Make sure 2 stl files are aligned.
• ** Adjust the scale of z (both inlay.stl and sign.stl) in case different layer height is used. 
• *** Make sure the height of inlay is always the same as layer height such that the nozzle will never touch the inlay when the sign is being printed.

printing the model

• print the inlay first.
• when it is done, please do not remove the printed inlay from the heat bed. 
• keep the temperature of heat bed and nozzle.
• change the color of filament.
• print the sign directly on top of the inlay

Happy Printing^^

1Ð = 1Ð

Do Only Good Everyday