This is a set of LEGO like bricks used for Prusa Tower model. The bricks are easy to print on the Original Prusa MK3S and should fit the original LEGO bricks.
The model is not complete without Lego Josef Prusa, you can download and print him here.
See the stop motion with LegoJo and printer factory here
Read more about printing LEGO like bricks at:
https://blog.prusaprinters.org/how-to-make-3d-printed-lego-and-lego-duplo-parts/
Printing the whole building is quite tricky: It will consume a lot of time and material (printing the model takes approximately 850 h and consumes more than 5 kg of material). Plus, we have no manual, just approximate number of pieces with photos of the complete model.
Print all regular bricks facing with buttons up (just as you would place regular lego pieces) with brim and no supports.
Some special warehouse parts should be printed rotated (see the 3mf file).
List of necessarry bricks (numbers may slightly differ):
Transparent PETG
1x6window (70 pcs)
1x6luxfer (13 pcs)
1x4window (59 pcs)
1x1high (279 pcs)
Prusament PLA Mystic Brown
1x1high (132 pcs)
1x2high (17 pcs)
1x3high (25 pcs)
1x4high (1 pc)
1x6high (12 pcs)
1x8high (27 pcs)
2x2high (25 pcs)
2x3high (89 pcs)
2x36high (2 pcs)
warehouse_wall2 (1 pc)
1x2low (3 pcs)
1x3low (1 pc)
1x2low (3 pcs)
1x15low (7 pcs)
warehouse_roof1 (1 pc)
warehouse_roof2 (1 pc)
Prusament PLA Pearl Mouse
1x1high (119 pcs)
1x2high (58 pcs)
1x3high (125 pcs)
1x4high (12 pcs)
1x6high (102 pcs)
1x8high (190 pcs)
2x2high (28 pcs)
2x3high (87 pcs)
1x2low (3 pcs)
1x8low (8 pcs)
Prusament ASA Natural
1x1high (8 pcs)
1x2high (10 pcs)
1x3high (29 pcs)
1x4high (4 pcs)
1x6high (22 pcs)
1x8high (36 pcs)
warehouse_wall1 (5 pcs)
warehouse_wall2 (5 pcs)
balcony_wall (1 pc)
warehouse_attic1 (1 pc)
warehouse_attic2 (1 pc)
warehouse_attic3 (1 pc)
1x4low (16 pcs)
1x8low (11 pcs)
Prusament PETG Galaxy Black
3x6low (1 pc)
3x7low (1 pc)
4x4low (1 pc)
15x5low (1 pc)
14x26low (1 pc)
15x20low (1 pc)
15x26low (5 pcs)
20x25base (12 pcs)
balcony1 (1 pc)
balcony2 (1 pc)
roof_half (1 pc)
roof_half_special (1 pc)
roof_half_middle (1 pc)
roof_special (1 pc)
Prusament PETG Jet Black + Prusa Orange
prusatower_sign (1 pc, layer change)
Good luck!
The author hasn't provided the model origin yet.