3030 CoreXY Motor Shims

Depending on the motor mounts, the XY motors may be pulled out of alignment with the belts due to the torsional forces produced by belt tension. I had one motor that required a thin shim behind it to adjust the alignment. I decided to design this to make the motor mounting look better and add adjustment capability.

Be careful with adjusting, this shim could place excessive force against the motor and mount.

Needed:

• 1 M5 x 10 mm screw
• 1 M5 nut
• 2 M5 x 12 mm screws with hammer head nuts for mounting.

Print Settings

Printer:

Anycubic Kossel Delta Plus

Rafts:

No

Supports:

Yes

Resolution:

.2

Infill:

50%

Filament:

Black

Notes:

I printed with supports to the build plate.