Pegboard Storage for Tineco Vacuum Accessories

These are pegboard clips I designed to store attachments for the Tineco Pure S12 Plus Vacuum.

I believe they will also work with Tineco's A10 and A11 series vacuums.

The Tineco Pure S12 Plus comes with a multitude of accessories to cover just about any vacuuming challenge. They also supply a bag, for the accessories that exceed the capacity of the storage/charging station. But, the user manual has a warning that the brush attachments should be stored in a way that will not deform the brushes. The bag storage does not meet that criteria, nor does it provide easy viewing or access to the attachments.

These mounts are designed for pegboards with 1/4 inch holes spaced 1 inch apart and 3/16 inch thick.

There are four types of mounts:

1. Standard hanging clip mount.

For small vacuum heads and flex extension tube. 2. Heavy duty hanging clip mount

Used for full size vacuum heads and main extension tube. 3. Standard post mount

For crevice tools 4. 90 degree post mount

For the Angled Soft Dusting Brush.

Print Settings

Printer:

Anycubic Kossel Delta Plus

Rafts:

No

Supports:

Yes

Resolution:

.2

Infill:

30%

Filament:

Real White

Notes:

Print as oriented in stl's with supports set for everywhere.

Remove supports. On the hanger clip don't forget the small support in the clip slot.

The bottom straight pegs are a snug fit into the 1/4 inch pegboard holes. This prevents the pegboard clips from coming loose during use.