This shroud is designed for the Hypercube Evolution printer.
Features:
Material:
A thicker fan can be used, but the mounting screw length will need adjustment.
(Maximum screw length = Fan thickness + 6mm)
Update: I installed this originally on my old motors, which continually got hot after installing TMC2208 drivers. The fans cooled the motors but the damage had already been done. I replaced the motors, and have been running with these coolers on my HEVO for more than a month. The motors now run cool.
Printer:
Anycubic Kossel Delta Plus
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
30%
Filament:
3D Solutech PLAReal Black
Notes:
Set the slicer to print outer walls before inner walls. This increases the accuracy of printed walls so that the M3 screw threads print correctly.
If the M3 screws do not fit, then the printer may be printing undersized.Print as oriented in the stl's. It's designed to print without supports with minor bridging.
Category: 3D Printer PartsThe author marked this model as their own original creation. Imported from Thingiverse.