Display Stand

This tilt angle adjustable display stand for displaying small items.

You choose rail parts according to the depth the objects you wish to display.

Print Settings:

• Material: “Stand_Spring.stl” recommended print with PETG. Other parts, PLA will work fine.
• Layer height: 0.2mm
• Supports: no
• Perimeters: 2

Assembly: 

Place the spring and gear in the case as shown in the image. Make sure that the spring and wheel are engaged before attaching the other side of the case. Snap-on the rail parts according to the height of the object.

Finally, it is inserted into the base part to complete the process. Use glue if necessary.