voron-0 LED strip

Step

1. print STL files
2. use the soldering iron to connect 2 RBG boards
3. use the soldering iron to weld wires on the RGB board and build a 3in xh2.54mm Male connector
4. extent of one wire from the `out` port of the lift RGB board
5. use M3x6 BHCS to fix RGB boards on the holder
6. lead the light cable from the `umbilical board` by a 4pin xh2.54mm Male connector with a 3pin xh2.54mm Female connector
7. connect the RGB boards by xh2.54mm connector. (PS, the `out` port wire on the left RGB board needs to be plugged into the 4pin xh2.54mm Male connector)
8. connect to the motherboard and check all the wire sequences of xh2.54mm connectors

Bom

1. v0-Umbilical x1
2. M3x6 BHCS x8-12
3. NeoPixel 8 x WS2812 5050 RGB LED x4
4. xh2.54mm connector Male&Female 3pin (option) x2
5. xh2.54mm connector Male 4pin x2
6. xh2.54mm pitch female pin x13
7. magnet 4mmx3mm x10

Tools

1. Soldering Iron
2. Crimpers Pliers
3. Wires Cables

https://github.com/mmusic/mm_3dprint/tree/main/design/voron-0%20LED%20strip