Lamp Clamp Table Mount

Replacement lamp clamp table mount for standard 1/2" shafts. Includes holes for wall or table mounting, though it probably wouldn't be strong enough for a wall mount. Two choices of shaft insertion.

Image is from here: https://www.amazon.com/Alvin-Office-Essentials-Paper-C-CLAMP/dp/B0015AQMHY/ref=pd_sim_229_2?_encoding=UTF8&psc=1&refRID=AQQ6PSVQHHN9V9SCZXBS These cost too much.

How I Designed This

Pulled measurements off one I already had.

Future

• CADs & STLs for the other parts (nut driver & bottom clamp)
• curved bottom to conform to the edges of round-edge tables

Assembly & Materials

• bottom clamp
• L shaped 1/2" shaft
• nut driver

Updates

13 May 17: I've added a version with a curved edge so that it can sit on the edge of round-edge surfaces. I used a radius gauge to determine that it was 19 mm or so.