Direct Drive X Carriage - Big Plans Printer System

These models are part of the Big Plans 3D Printer System:  https://lilmikey.com/3DPrinterSystem.html

These models comprise a Direct Drive X Carriage using a standard sized 42n NEMA 17 stepper, a motor-mounted extruder like the BMG or Titan, and a V6-style radiator.

• X Carriage Base - base of the direct drive X Carriage
• GT2 Belt Clamp - Secures the GT Belts to the carriage under tension
  ADXL345 Bushing - Bushing to raise the accelerometer slightly to not iterfere with board solder joints
• Carriage Bottom Plate - BMG /flip - Bottom plate with fan alignment for BMG extruder
• BLTouch Volcano Bushing - Bushing that positions BLTouch sensors to accomodate Volcano heater blocks
• Direct Blower Duct - Volcano - Blower part cooler duct for Volcano heater blocks
• Direct Blower Duct - Blower part cooler duct for standard heater blocks
• Part Cooler Blower Fan Mount - Mounts a blower fan to the Blower Part Cooler Duckt
• Direct 40mm Part Cooler - 40mm fan part cooler duct for standard heater blocks
• Carriage Bottom Plate - Titan /flip - Bottom plate with fan alignment for Titan extruder
• Carriage Bottom Plate - Titan - Accelerometer /flip - Bottom plate with fan alignment for Titan extruder incl Accelerometer
• Carriage Bottom Plate - BMG - Accelerometer /flip - Bottom plate with fan alignment for BMG extruder incl Accelerometer
• Cable 2020 Mount - Mounts to the frame to secure the cable loom in place
• Cable 2020 Mount - Top - Mounts to the frame to secure the cable loom in place and includes cable chain holes
• X Carriage Cable Tower - Tower that attaches to X Carriage to support the wire loom