Case for AC to DC Converter

I made a snap on case for my AC to DC converter to be able to screw it in place and make it look a little better.

I uploaded the gcode, STL and Fusion file so you can modify as needed.

The case can be glued with cyanoacrylate or any other glue easily for a more permanent adhesion. The triangle shapes make the top part snug enough so that it snaps in place without adhesive.

The AC to DC converter is made to transform 24VAC to 24VDC to open a 120V AC relay switch which powers a 1HP pump at 20Amps.

Print instructions

Prints are currently set for 15% Infill @ 0.20 Layer Height.

Adjustments to the model can be made through the Fusion 360 file, the STL file, or the gCode file.