Huawei Honor 6X Charging Stand

Charging stand for the Huawei Honor 6X. You may have to modify the charging cord opening based on your cord. This cord that this is modeld for can be purchased here: https://www.amazon.com/gp/product/B01M0LK2SK/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

The phone opening is designed to accept the phone in a case. The case that this is designed for can be purchased here: https://www.amazon.com/gp/product/B01MG92TCO/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

Feed the phone cord through the hoop at the rear, then down through the hole in the bottom, through the groove, then up into the charger seat.

If you use a different case or cord, there's a good chance you'll have to modify the stand.

Use supports everywhere, to support all of the various openings. I printed mine at 20% infill.

A bonus with this design is that the front firing speaker hole seems to provide an increase in dB for the speaker. Makes it great for using your phone as your alarm.