Prusa MK3S+ Knob

Extra large knob for your MK3S+ 3d printer. Printed on PLA with .15 mm layer height, 15% infill with .4 nozzle. The center insert is solid but you can play with different infill patters for the center insert as shown in the pictures. You will need to print 6 knob bolts for the knob to fill all the little bolt holes. Glue the center insert and the bolts to the knob body and you are good to go. You will still have access to the “X” button below the knob. I don't use it that much that is why I created a bigger knob that usual.