Low Poly Tree Stump Pen Holder - tweaked

I printed this pen holder on my Bambu Lab P1S with the following settings:

Material: Wood PLA from Bambu Lab in Rosewood
Nozzle-Temp: 220°C
Bed-Temp: 55°C
Support: No
Nozzle: 0,4mm
Layer Height: 0,2mm (adaptive)

Infill: 15%
Initial Layer Speed: 75mm/s
Outer Wall Speed: 200mm/s
Inner Wall Speed: 300mm/s
Infill Speed: 250mm/s
Travel Speed: 500mm/s
Fan Speed: 100%

I scaled it down by about 50% to make it smaller for holding just 2-3 pens.
Absolutely great model.
Thanks for sharing it.

I scaled this down a little and used PLA. Turned out great

Printed in Lumberjake pla
Resized to fit ikea these small ikea plants

It's part of a gift now, I scaled it down to 30%. It's made from Recycling Fabrik rPLA

Sunlu Wood PLA Low Temp
185°
0.2 layer height
0.4 nozzle
40mm/s
2 walls
10% infill

MatterHackers wood filament, no supports.